Used by: auto detailers, warehouses, allowing You to Safely Lift, Body Shops, Painters, No Imitations, Scrap-Bookers and MORE. Pro kit is great for applying decals, pPF Paint Protection Film, transfer Tapes, Vehicle Wraps from 3M, Oracal and More!. Please note: single edge razor blades Should Always be Used with a Compatible Utility Knife to Avoid Injury.

Great for hand application of 3M Di-Noc Carbon fiber, Delicate Applications. Genuine lil' chizlers, guaranteed! these are the best vinyl film removal tool ever! they are razor thin along the edges, No Knock Offs, Sign Shops, Scrape and Remove Vinyl Film without Scratching a Variety of Surfaces. Always practice safe use when using the included razor blades.

If you been looking for squeegee applicators and lil chizlers look no further! Our pro kit has everything you need in one package. Multipack includes: 2 premium quality Felt Squeegees, 2 Lil Chizlers, and 2 Single Edge Razor Blades. Two premium felt squeegees, 2 lil chizlers and 2 single edge blades ensure your project is nothing short of a success.

To avoid injury, we strongly recommend use of the blades with a utility knife that allows for replacement blades. Premium felt edge squeegees are medium-hard card plastic, textured & reflective films and vehicle Vinyl Wraps. Extremely Durable & Long Lasting. Felt edge of applicator is Great for More Sensitive, Semi-Flexible Applicators.

---

RAPID TAC Application fluid for Vinyl Wraps Decals Stickers 4oz Sprayer

Step 3. Clean surface thoroughly with Rapid Tac and a kitchen paper towel. We do recommend rapid prep as a pre-cleaner for surfaces that may have been exposed to wax, silicone, or other suspected contaminants STEP 2. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions.

Spray surface again with Rapid Tac, peel backing off decal and place on wet surface. Rapid tac application fluid for vinyl Wraps Decals Stickers 4oz SprayerFor fast, easy, quality installation of vinyl graphics with no bubbles. Rapid tac application Fluid shocked installers by allowing them more control over their applications than ever before.

It is now possible to achieve a full bond in as little as ninety seconds. Using rapid tac application fluid can often allow a large graphic to be installed with one person where two people were required to perform the same installation dry. Your bottom line will benefit from faster applications and less failures as well.

Step 1. Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics.


Similar products

---

Stainless Steel Precision Cutting Knife with Lockable and Replaceable 30 Degree Acute Angle Blade Specially Designed for Automotive Vinyl Wrap Material

Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Fast shipping from official VViViD factory; Original packaging; 100% Customer Support & Satisfaction. 038mm thin precision blade with special 30 degree angle.

Light-duty: easily cuts through car vinyl, leather, cardboard, film, thin plastics, etc. Replaceable blades. 6 locking points with belt/pocket clip.


Similar products

---

3M Primer 94 Pen 0.2oz | Vinyl Car Wrap Application Tool 5 Pack

Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Fast shipping from official VViViD factory; Original packaging; 100% Customer Support & Satisfaction. Allow primer to dry before second application.

It is developed to be used in conjunction with 3M VHB tapes to increase the bonding strength of the tape. 6 locking points with belt/pocket clip. It increases the bond between vinyl wraps and nearly anything where a strong, durable bond is required. Light-duty: easily cuts through car vinyl, cardboard, film, leather, thin plastics, etc.

Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. 038mm thin precision blade with special 30 degree angle. Bonding surface should be clean and dry. This product can be used to promote adhesion of 3M tapes to surfaces such polyethylene, ABS, wood, concrete, glass, polypropylene, PET/PBT blends, metal and painted metal surfaces.

Replaceable blades. This adhesion promoter can be used in a wide variety of applications. It is a popular tool to assist in applying automotive vinyl wraps.


Similar products

---

RAPID TAC II Application fluid for Vinyl Wraps Decals Stickers 4oz Sprayer

Use on plastic, painted, rubber, and even bare metal. Useful on a wide variety of substrates. Position decal. Nowdays things are a little different. Bonding surface should be clean and dry. Use squeegee to remove fluid, using a good deal of pressure and working from the center out to the edges in all directions.

Spray surface again with Rapid Tac, peel backing off decal and place on wet surface. Clean surface thoroughly with Rapid Tac and a kitchen paper towel. We developed rapid tac ii to work with a wider variety of films such as the economy calendered, reflective, high performance calendered, polyester, metallic, intermediate calendered, mylar and other specialty films.

Back in the day choosing a vinyl film was easy with basically two film types, cast, and calendered. Sign and graphics professionals now have more types of vinyl films to choose from than ever, with more adhesive types as well. Replaceable blades. Step 2. Do not use other cleaners or solvents. Light-duty: easily cuts through car vinyl, cardboard, film, leather, thin plastics, etc.

Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. Saturate paper cover tape, with Rapid Tac, if any, then remove paper tape.


Similar products

---

Black High Gloss Realistic Paint-Like Microfinish Vinyl Wrap Roll with VViViD XPO Air Release Technology 6ft x 5ft

Used for wrapping cars, boats, motorcycles, airplanes, interior or exterior applications. Use on plastic, rubber, painted, and even bare metal. Useful on a wide variety of substrates. Bonding surface should be clean and dry. Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics.

Bonds in as little as 90 seconds when squeegeed. Fast shipping from official VViViD factory; Original packaging; 100% Customer Support & Satisfaction. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Adhesive : solvent-based, repositionable, permanent adhesive.

Allow primer to dry before second application. Formulated for specialty films and cold weather applications. Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. This premium automotive vinyl by vvivid vinyls is specially engineered for DIY'ers.

With a micro-finished surface, the gloss films are much easier to clean, maintain and install.


Similar products

---

3M Primer 94 Pen 3-Pack | Car Wrapping Application Tool

Adhesive : solvent-based, repositionable, permanent adhesive. Formulated for specialty films and cold weather applications. Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. This premium automotive vinyl by vvivid vinyls is specially engineered for DIY'ers.

Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Fast shipping from official VViViD factory; Original packaging; 100% Customer Support & Satisfaction. Replaceable blades. This adhesion promoter can be used in a wide variety of applications.

Use on plastic, painted, rubber, and even bare metal. Useful on a wide variety of substrates. This product can be used to promote adhesion of 3M tapes to surfaces such polyethylene, concrete, wood, ABS, glass, polypropylene, PET/PBT blends, metal and painted metal surfaces. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films.

Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.


Similar products

---

3M Tape Primer 94 1/2 Pint 8oz For Vinyl Di-Noc

Be sure the primed surface remains free from contaminants prior to applying the tape. 038mm thin precision blade with special 30 degree angle. See the product description below for the details about these technologies. Application: dry. Use on plastic, painted, rubber, and even bare metal. Useful on a wide variety of substrates.

Porous surfaces may require 2 applications of 3M primer 94 for uniform coverage and good adhesion. 3m primer 94 may be applied with brush or swab. Light-duty: easily cuts through car vinyl, leather, film, thin plastics, cardboard, etc. Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.

At 4. 3mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum. This product has built in vvivid air release, vvivid resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality.

Can't be shipped outside of USA Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics.


Similar products

---

Rapid Tac Rapid Prep Surface Cleaner for Vinyl Graphics Wraps and Decals 4 Ounce Sprayer

Light-duty: easily cuts through car vinyl, film, thin plastics, leather, cardboard, etc. Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. Allow primer to dry before second application. Surface primer: This primer promotes adhesion of 3M tapes. For use on many plastic, rubber, painted and bare metal substrates.

For use with 3m di-noc Carbon fiber and Wood Grain Vinyls. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films. Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. 6 locking points with belt/pocket clip. Rapid prep easily and safely eliminates these and other contaminants ensuring a successful paint or film application, and a happy customer.

Makes vinyl installations faster and easier. Aids in application without bubbles. Allows for re-positioning of graphics. Bonds in as little as 90 seconds when squeegeed. Fast shipping from official VViViD factory; Original packaging; 100% Customer Support & Satisfaction. Using a plain white household paper towell, thoroughly wipe surface from center outward until dry.

See the product description below for the details about these technologies.


Similar products

---

3M Edge Sealer 3950 1/2 Pint 8oz For Vinyl Graphics

Surface primer: This primer promotes adhesion of 3M tapes. For use on many plastic, rubber, painted and bare metal substrates. For use with 3m di-noc Carbon fiber and Wood Grain Vinyls. Use this product to seal exposed edges of compatible films. Allow primer to dry before second application. Allow primer to dry before second application.

6 locking points with belt/pocket clip. Use to clean surfaces prior to graphics installation or painting. Safe and effective deep cleaning water based solvent. Removes dirt, wax, grease, oil, and silicone. Works on automobile paint, bare metals, sign materials, and glass. Clear edge sealer includes felt dauber for application.

Light-duty: easily cuts through car vinyl, film, leather, thin plastics, cardboard, etc. Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes. Recommended application temperature 50° to 100° Fahrenheit. Bonding surface should be clean and dry. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.

At 4.


Similar products

---

Wagner 0503008 HT1000 1,200-watt Heat Gun

Use on plastic, rubber, painted, and even bare metal. Useful on a wide variety of substrates. Allow primer to dry before second application. Allow primer to dry before second application. Light-duty: easily cuts through car vinyl, cardboard, film, leather, thin plastics, etc. Tape adhesion promoter DI-NOC promotes the adhesion of 3M tapes.

Bonding surface should be clean and dry. General purpose gun for stripping paint, thawing pipes, loosening floor tiles. It produces 1200 watts and 4100 btus of power with temperature settings of 750 degree f or 1000 degree f. Surface primer: This primer promotes adhesion of 3M tapes. For use on many plastic, rubber, painted and bare metal substrates.

For use with 3m di-noc Carbon fiber and Wood Grain Vinyls. Download manual buy parts. The ht1000 is a general purpose heat gun that is suitable for many heating applications ranging from removing paint and old flooring, loosening rusted bolts, bending plastics, or thawing frozen pipes. Recommended application temperature 50° to 100° Fahrenheit.

Use this product to seal exposed edges of compatible films. Replaceable blades.


Similar products