Weight: about 027g/pc. Description:Dimension:35*22. 2*7. 5mmweight: about 027g/pccolor: random red, yellow, black, bluepackage Including6 * Foam Insertrandom color For eaching e010 black frame to fit the standard Tiny Whoop style batteries. Color: random red, black, yellow, blue. Dimension:35*22. 2*7. 5mm.

---

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna： exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature:：25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type：FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Fpv micro aio camera 5.

8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix.


Similar products

---

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

Work for blade inductrix, Tiny Whoop, Nano QX etc. Bonus rubber rings. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cw motor2 * CCW motor Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.

8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW.




Similar products

---

Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera

Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Work for blade inductrix, Tiny Whoop, Nano QX etc. This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the f04 fpv camera.

3pcs f04 fpv camera vacuum plastic mount tiny whoop for Crazepony FPV Micro AIO CameraDescription:This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the F04 FPV camera within 3 colors of Green, Red, Transparent color.

With very light weighs in at 1. 4g. Miniature and light weight design. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Small Size: 4.


Similar products

---

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

With very light weighs in at 1. 4g. Tiny whoop Blade inductrix future choice of battery. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Miniature and light weight design. Work for blade inductrix, Tiny Whoop, Nano QX etc. This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops.

It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the f04 fpv camera. Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Bonus rubber rings.


Similar products

---

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

Bonus rubber rings. Miniature and light weight design. Antenna Gain: 1. 5±03dbi. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Polarization : Linear. Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5.

8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzSWR:≤2. 0retrun loss:﹥-10DBAntenna Gain: 1. 5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5.

8g fx798t fpv brass antenna Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.


Similar products

---

LHI RC Quadcopter Frame Black and 8pcs Propellers Blue for Tiny Whoop Blade Inductrix or Eachine E010

Impedance :50 Ohm. Note the location where the battery is placed. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzv. Tiny whoop Blade inductrix future choice of battery. Polarization : Linear. Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Package includes: 1pc quadcopter frame and 4pcs 4-leaf propellers.


Similar products

---

Crazepony 3 Sets Tiny Whoop JST-PH 2.0 Pin Male Female Connector Cable Kit for Blade Inductrix Battery Upgrade

Make sure that the rack matches your battery. Frame wheelbase: 67mm. Blade inductrix update connector cable. Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation.

Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Miniature and light weight design. Suitable for tiny whoop, eachinE E010 mini drone. Does not fit inductrix flight controller without modification. Impedance :50 Ohm. Swr:≤2. 0 Material: PVC. Special sauce edition 17500kv @3.

7v / 65, 000 rpm. 3 setstiny whoop JST-PH 2. 0 pin male female connector cable for Blade InductrixDescriptions:Item: Male JST-PH 2. 0, female jst-PH 2. 0length: 40mm/per unit--------------------package Including3 * JST-PH 2.


Similar products

---

Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor

Must have for HV battery and high performance. Make sure that the rack matches your battery. Frame wheelbase: 67mm. Polarization : Linear. Package includes: 1pc quadcopter frame and 4pcs 4-leaf propellers. Male jst-ph 2. 0, female jsT-PH 2. 0 An omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzv. Tiny whoop Blade inductrix future choice of battery. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Retrun loss:﹥-10db. Miniature and light weight design. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera.

Note the location where the battery is placed. Impedance :50 Ohm. Small Size: 4. 7 * 4. 0 * 1. 5 cm.


Similar products

---

Crazepony Battery Box Plastic Storage Case with Foam Liner for 1S Lipo Battery

Impedance :50 Ohm. With very light weighs in at 1. 4g. Note the location where the battery is placed. Suitable for tiny whoop, eachinE E010 mini drone. Does not fit inductrix flight controller without modification. Idtx483-cf. Material: PVC. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Available for 24pcs 1s lipo batteriesnot included, suggested width: 12mm, thickness: 6mm.

Dimension: 160*90*60mm. Make sure that the rack matches your battery. Frame wheelbase: 67mm. Tiny whoop Blade inductrix future choice of battery. Antenna Gain: 1. 5±03dbi. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Upgrade your tinywhoop with power JST-PH 2. 0 Rakon. Lightweight and convenient plastic box.


Similar products

---

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Length: 40mm/per unit. Upgrade your tinywhoop with power JST-PH 2. 0 The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Suitable for tiny whoop, eachinE E010 mini drone.

Does not fit inductrix flight controller without modification. Little modification, more applications for Blade Inductrix. Antenna Gain: 1. 5±03dbi. Impedance :50 Ohm. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Inner foam Liner provides maximum protection.

Special sauce edition 17500kv @3. 7v / 65, 000 rpm.


Similar products