Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

#ad
Crazepony #ad - Little modification, more applications for Blade Inductrix. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: redquantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Frame wheelbase: 67mm, Frame weight: 5g. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv.

More information about Crazepony #ad

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

#ad
Crazepony #ad - Work for blade inductrix, Tiny Whoop, Nano QX etc. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cW motor2 * CCW motor Bonus rubber rings. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

#ad
Crazepony #ad - Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: 1. 8g eachno load speed: 70000±15% rpmrated load speed: 40500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwwork for blade inductrix, Tiny Whoop, Nano QX etcBonus rubber ringsPackage Including2 * CW motor2 * CCW motor Bonus rubber rings. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm.

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings #ad - . Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. With 1. 25mm jst plug, perfect for Inductrix FC. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Insane for blade inductrix, Tiny Whoop, Nano QX etc.

More information about Crazepony #ad


Similar products



Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

#ad
Crazepony #ad - With 1. 25mm jst plug, perfect for Inductrix FC. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Miniature and light weight design. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1.

5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc #ad - Wide lens angle. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

#ad
Crazepony #ad - Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. 4pcs 230mah hv 1s lipo Battery 30C 3.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector #ad - 8v for tiny whoop blade Inductrix JST-PH 2. 0 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 57mm * 12. 5mm * 6. 2mmweight: 6. 7g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: JST-PH2.

More information about Crazepony #ad


Similar products



Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

#ad
Crazepony #ad - Suitable for battery of blade inductrix, nano CP X, Nano QX 3D, Glimpse, mCP X, Nano QX etc. With 1. 25mm jst plug, perfect for Inductrix FC. Board size: 62. 5x32x5mm, weight: 17g06ounces. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation.

The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Input charge connector: Male 4mm Banana Plug. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Special sauce edition 17500kv @3.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX #ad - 7v / 65, 000 rpm. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Weight: 1.

More information about Crazepony #ad


Similar products



Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor

#ad
Rakon #ad - Input charge connector: Male 4mm Banana Plug. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm. Suitable for battery of blade inductrix, Nano QX 3D, mCP X, nano CP X, Glimpse, Nano QX etc. Rakon. Description:- support Frame Stiffening and Simple installation without any glue or fastening.

Material: 3K Pure Carbon Fiber. Weight: 059g = 002oz. Use for stock or cnc kit 6mm Motor - Blade Inductrix/FPV. 2. Tiny whoop Blade inductrix future choice of battery. Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1.

Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor #ad - 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12.

More information about Rakon #ad


Similar products



Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

#ad
Crazepony #ad - Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Idtx483-cf. Input charge connector: Male 4mm Banana Plug. Suitable for battery of blade inductrix, Nano QX 3D, Glimpse, mCP X, nano CP X, Nano QX etc. Rakon. Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2.

2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * FPV Camera MountWhite1 * FPV Camera MountOrange Bonus rubber rings. Board size: 62. 5x32x5mm, weight: 17g06ounces. This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. Tiny whoop Blade inductrix future choice of battery. Work for blade inductrix, Tiny Whoop, Nano QX etc.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera #ad - Speed: insane, 19000kv / 70000 rpm. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah.

More information about Crazepony #ad


Similar products



Blade Main Frame: Inductrix

#ad
Horizon Hobby BLH8706 #ad - Blade main frame: inductrix, BLH8706 Bonus rubber rings. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Work for blade inductrix, Tiny Whoop, Nano QX etc. Speed: insane, 19000kv / 70000 rpm. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Idtx483-cf. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX.

Blade Main Frame: Inductrix #ad - Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. With 1.

More information about Horizon Hobby BLH8706 #ad


Similar products



Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

#ad
Crazepony #ad - Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5. 8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzSWR:≤2. 0retrun loss:﹥-10DBAntenna Gain: 1.

5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5. 8g fx798t fpv brass antenna Bonus rubber rings.

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera #ad - Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Swr:≤2.

More information about Crazepony #ad


Similar products



Crazepony Blade Inductrix Case Quad Box with Foam Liner Twin Zips for Inductrix FPV Micro Quadcopter

#ad
Crazepony #ad - Inner foam Liner provides maximum protection. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Just remove the front, and 2 side Flight Controller Screws, press them into the mount, and reassemble. Main frame: Inductrix. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Idtx483-cf. Swr:≤2. 0 With 1.

25mm jst plug, perfect for Inductrix FC. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Includes an interior netted storage compartment for additional accessories. Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Miniature and light weight design. Capacity: standard voltage 4. 2v, 230mahor High voltage 4.

Crazepony Blade Inductrix Case Quad Box with Foam Liner Twin Zips for Inductrix FPV Micro Quadcopter #ad - 35v, 250ish mah. The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Blade inductrix case quad box with foam liner Twin Zips for Inductrix FPV Micro Quadcopter Description:Color: BlackDimension: 16*11.

More information about Crazepony #ad


Similar products