Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

Polarization : Linear. Crazepony 4pcs tiny Whoop FPV Dipole Whip Antenna 5. 8g 35mm omnidirectional weld connector for FX798T FPV Micro AIO CameraDescription:Electrical Characteristics : 5. 8g receiveran omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzSWR:≤2.

0retrun loss:﹥-10DBAntenna Gain: 1. 5±03dbipolarization : linearimpedance :50 OhmMaterial of Radiator : CuMarerial of PlasticCable type: OD 1. 13mmoperation temperature : -10℃ to +180℃storage temperature : -10℃ to +180℃Connector: WELDWire : RF113balckLength : 35mmPackage Including4 * 5. 8g fx798t fpv brass Antenna 5.

8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Retrun loss:﹥-10db. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzv. Antenna Gain: 1. 5±03dbi.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

Miniature and light weight design. Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna: exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature::25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type:FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Fpv micro aio camera 5.

8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Blade Main Frame: Inductrix
Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV


Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera

3pcs f04 fpv camera vacuum plastic mount tiny whoop for Crazepony FPV Micro AIO CameraDescription:This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the F04 FPV camera within 3 colors of Green, Red, Transparent color.

With very light weighs in at 1. 4g. Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation. Miniature and light weight design. Small size is only 4. 7 * 4. 0 * 1.

5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes.


Similar products

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Wolfwhoop WT05 Micro AIO 600TVL Camera Only 3.4g 5.8GHz 48CH 25mW FPV transmitter with Dipole Brass Antenna Combo for FPV Quadcopter Drone
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery


Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

Small Size: 4. 7 * 4. 0 * 1. 5 cm. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. All stock hardware is used, super simple installation. Suitable for eachine e010 JJRC H36 or Tiny Whoop. With very light weighs in at 1. 4g. This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops.

It is still low enough to look down between the ducts to drop thru small slots or gaps. This is a camera/vtx mount for the f04 fpv camera. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Little modification, more applications for Blade Inductrix. Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: RedQuantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Fpv micro aio camera 5.

8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Blade Main Frame: Inductrix
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony Blade Inductrix Case Quad Box with Foam Liner Twin Zips for Inductrix FPV Micro Quadcopter


Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

The connector plug: jst-ph 2. 0 aka high current ultra micro, Powerwhoop, mCPX. Miniature and light weight design. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. With very light weighs in at 1. 4g. 4pcs 230mah hv 1s lipo Battery 30C 3. 8v for tiny whoop blade Inductrix JST-PH 2. 0 connectorfeatures:item: hv 1s crazepony Lipo BatteryRate: 30CDimension: 57mm * 12.

5mm * 6. 2mmweight: 6. 7g/per unitcapacity: 230mah in standardvoltage, 250mAh in high voltageThe connector plug: JST-PH2. 0 aka high current ultra micro, mcpxthis battery is lighter than the usual 230mah battery, Powerwhoop, and can be charged to either standard voltage 4.2v, 230mah or high voltage 4. 35v, 250ish mah.

This is newly developed chemistry for a longer lifetime and safer charging situation. Tiny whoop Blade inductrix future choice of battery. Frame wheelbase: 67mm, Frame weight: 5g. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah.


Similar products

Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 3 Sets Tiny Whoop JST-PH 2.0 Pin Male Female Connector Cable Kit for Blade Inductrix Battery Upgrade
Crazepony 6 in 1 JST-PH 2.0 Lipo Charging Adapter Cable to 6S Balance Charger
Crazepony 1S Lipo Battery Charger with Micro JST 1.25 and JST-PH 2.0 for Blade Inductrix Tiny Whoop mCX mCPX
Blade Main Frame: Inductrix
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV


Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

Bonus rubber rings. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv.

Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1. 25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc.

Package including2 * cw motor2 * CCW motor Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm.


Similar products

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Blade Main Frame: Inductrix
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix Micro JST 1.25 Connector
Crazepony 4pcs 250mAh 1S 3.7V 35C Blade Inductrix Lipo Battery
5pcs-Tattu LiPo Battery Pack 220mAh 3.7V 45C 1S with Ultra Micro for Blade Inductrix Tiny Whoop FPV Nano QX Nano CPX Nano CPS in the E-flite Micro Planes


Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Bonus rubber rings. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: 1. 8g eachno load speed: 70000±15% rpmrated load speed: 40500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwwork for blade inductrix, tiny Whoop, Nano QX etcBonus rubber ringsPackage Including2 * CW motor2 * CCW motor Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3.

6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Special sauce edition 17500kv @3.

7v / 65, 000 rpm.


Similar products

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Blade Main Frame: Inductrix
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV
Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings


Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation.

Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps.

This is a camera/vtx mount for the f04 fpv camera. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix. Only fit for fx798t fx797T MC-01 camera.

Weighs in at 2~3g. Bonus rubber rings. Special sauce edition 17500kv @3.


Similar products

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony FX798SC Micro FPV Camera Tiny Whoop 5.8G 25mW 40CH Transmitter with Exclusive Dipole Whip Antenna for Blade Inductrix etc
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop


Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop

Insane for blade inductrix, Tiny Whoop, Nano QX etc. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation.

Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Frame wheelbase: 67mm, Frame weight: 5g. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Weight: about 027g/pc. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. This is a camera/VTX mount for the Blade Inductrix. Weighs in at 2~3g. Just remove the front, and reassemble.

For eaching e010 black frame to fit the standard Tiny Whoop style batteries. Capacity: standard voltage 4.


Similar products

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Crazepony 3pcs F04 FPV Camera Vacuum Plastic Mount Tiny Whoop for Crazepony FPV Micro AIO Camera
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera
LHI RC Quadcopter Frame Black and 8pcs Propellers Blue for Tiny Whoop Blade Inductrix or Eachine E010
Crazepony 3 Sets Tiny Whoop JST-PH 2.0 Pin Male Female Connector Cable Kit for Blade Inductrix Battery Upgrade
Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony Battery Box Plastic Storage Case with Foam Liner for 1S Lipo Battery
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame


Blade Main Frame: Inductrix

Blade main frame: inductrix, BLH8706 Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras.

All stock hardware is used, and 2 side Flight Controller Screws, press them into the mount, super simple installation. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. With very light weighs in at 1. 4g.


Similar products

Rakonheli CNC 3K Pure Carbon Fiber Stiffener (6mm Motor) - Blade Inductrix/FPV
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Blade Prop Set (4) White: Inductrix
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
BETAFPV 4 Sets 3-blade Props for Tiny Whoop Quad
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV


Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor - Blade Inductrix/FPV

Description:- support Frame Stiffening and Simple installation without any glue or fastening. Material: 3K Pure Carbon Fiber. Weight: 059g = 002oz. Use for stock or cnc kit 6mm Motor - Blade Inductrix/FPV. 2. This is the perfect angle for both fast-forward flight as well as slow manuvering thru dense treetops. It is still low enough to look down between the ducts to drop thru small slots or gaps.

This is a camera/vtx mount for the f04 fpv camera. Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Bonus rubber rings. Just remove the front, and reassemble. For eaching e010 black frame to fit the standard Tiny Whoop style batteries. With very light weighs in at 1. 4g. Special sauce edition 17500kv @3.

7v / 65, 000 rpm. Frame wheelbase: 67mm, Frame weight: 5g. Tiny whoop Blade inductrix future choice of battery. The connector plug: jst-ph 2.


Similar products

Blade Main Frame: Inductrix
Crazepony 4pcs 6x15mm Motor (Speed: Faster) 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings
Rakonheli 31mm 3 Blade Clear Propeller (2CW+2CCW; 0.8mm Shaft) (Black) - Blade Inductrix/FPV
Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame
Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX
Crazepony 4pcs 6x15mm Motor (Speed: Insane) 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings
Crazepony Blade Inductrix Case Quad Box with Foam Liner Twin Zips for Inductrix FPV Micro Quadcopter
Blade Prop Set (4) White: Inductrix
Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc
Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector