Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera

#ad
Crazepony #ad - Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount Works well with the 1. 8 lense on these cameras. All stock hardware is used, super simple installation. Slip the cameras power wires through the hole in the mount, and seat the camera in the mount.

Holds the camera securely and eliminates the chance of tearing a SMD component of the board with aggressive double sided tapes. 20 degree mount works well with the 1. 8 lense on these cameras. All stock hardware is used, press them into the mount, and 2 side Flight Controller Screws, super simple installation.

Crazepony 3pcs FPV Camera Mount Inductrix Tiny Whoop for Quadcopter Camera #ad - Solder your power wires to the Battery input pads and your ready to fly. Print settings:print: 3d typerafts: noSupports: NoInfill: 100%SizeL*W*H: 4 * 2. 2 * 1. 3 cmpackage including1 * fpv camera mountblack1 * fpv camera MountWhite1 * FPV Camera MountOrange This is a camera/VTX mount for the Blade Inductrix.

Weighs in at 2~3g. 3pcs inductrix fpv camera mount tiny whoop for Quadcopter CameraSummary:This is a Camera/VTX mount for the Blade Inductrix. Only fit for fx798t fx797T MC-01 camera.

More information about Crazepony #ad

Crazepony 4pcs Propellers Red and Tiny Whoop Eachine E010 RC Quadcopter Frame

#ad
Crazepony #ad - Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Little modification, more applications for Blade Inductrix. Tiny whoop quadcopter frame blade inductrix eachine e010 with 4pcs propellers reddescription:frame wheelbase: 67mmmaterial: pvcpropeller color: redquantity: 1pc quadcopter frame and 4pcs 4-leaf propellersUsage: for Tiny Whoop, Blade Inductrix or Eachine E010--------------------Package Including1 * RC Quadcopter E010 Frame Black 4 * 4-leaf Propellers Red1 * Battery Foam Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Frame wheelbase: 67mm, Frame weight: 5g.

More information about Crazepony #ad


Similar products



Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

#ad
Crazepony #ad - Frame wheelbase: 67mm, Frame weight: 5g. Miniature and light weight design. Specificationoutput power: 25mWSupply Voltage: 2. 9-5. 5vsize : 47 * 14. 8 * 12. 5 mmweight: 3. 6gantenna: exclusive dipole whip antennaPower consumption: 200~215MA5V DCINFrequency: 5. 8ghz 5 bands 48 channels, with raceband: 5362~5945mhzfield of view: 120 degrees viewing angleoperating temperature: -10℃~+60℃ambient temperature::25℃channel SEL:Touch SwitchChannel Indicate:CH1~CH8 Channel indication with 8LEDS and A~F frequency, group Indicate with 6LEDSModulation type:FMTransmit power: 13±1dBm; Frequency control: PLLAll harmonic: Max -50dBmFrequency Stability: ±100KHz Typ.

Frequency precision: ±200KHz Typ. Channel carrier error: 1db antenna port: 50 Ωsensor:pal: 720x540/ntsc:640x480 1/4"lens anGEL: H:120°/V:100°Base-band interface: P1. 27*2profile dimension: 14. 5mm*12. 2mm+14. 5mm*12mmpackage including1 * fpv Micro AIO Camera1 * Micro JST 1. 25 to 2 pin wafer Cable 1. 5cm y splitter1 * random color camera mount Suitable for eachine e010 JJRC H36 or Tiny Whoop.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc #ad - Including 1pc quadcopter frame and 4pcs 4-leaf propellers.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

#ad
Crazepony #ad - Frame wheelbase: 67mm, Frame weight: 5g. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Bonus rubber rings. Little modification, more applications for Blade Inductrix. Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1.

25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc. Package including2 * cw motor2 * ccw motor Suitable for eachine e010 JJRC H36 or Tiny Whoop. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix.

Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings #ad - Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera

#ad
Crazepony #ad - Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Swr:≤2.

Crazepony 4pcs 5.8G FX798T FPV Brass Antenna 35mm Omnidirectional Weld Connector for FX798T FPV Micro AIO Camera #ad - 0 Work for blade inductrix, Tiny Whoop, Nano QX etc. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Antenna Gain: 1. 5±0

More information about Crazepony #ad


Similar products



Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings

#ad
Crazepony #ad - With 1. 25mm jst plug, perfect for Inductrix FC. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Speed: insane, 19000kv / 70000 rpm. Retrun loss:﹥-10db. Bonus rubber rings. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna.

Frequency: 4900-5900mhzv. Polarization : Linear. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Antenna Gain: 1. 5±03dbi. Little modification, more applications for Blade Inductrix. Impedance :50 Ohm. Miniature and light weight design. Work for blade inductrix, Tiny Whoop, Nano QX etc. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera.

Crazepony 4pcs 6x15mm Motor Speed: Insane 19000KV for Blade Inductrix Tiny Whoop Micro JST 1.25 Plug with Rubber Rings #ad - Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 0

More information about Crazepony #ad


Similar products



Crazepony FX798SC Micro FPV Camera Tiny Whoop 5.8G 25mW 40CH Transmitter with Exclusive Dipole Whip Antenna for Blade Inductrix etc

#ad
Crazepony #ad - Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. This is camera works on a 2. 5v - 5v range which means it can run off the Inductrix's 3. 7v single cell battery. Featuring all 40 channels with Raceband that can be selected via the built-in push button.

Speed: insane, 19000kv / 70000 rpm. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. With 1. 25mm jst plug, perfect for Inductrix FC. Retrun loss:﹥-10db. Antenna Gain: 1. 5±03dbi. An omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzv. Polarization : Linear. Apart from this they look identical with the same dimension and weight.

Crazepony FX798SC Micro FPV Camera Tiny Whoop 5.8G 25mW 40CH Transmitter with Exclusive Dipole Whip Antenna for Blade Inductrix etc #ad - Frame wheelbase: 67mm, Frame weight: 5g. Little modification, more applications for Blade Inductrix. Impedance :50 Ohm.

More information about Crazepony #ad


Similar products



Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor

#ad
Rakon #ad - The fx798sc has a dipole whip antenna whereas FX797T and FX798T have cloverleaf. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Idtx483-cf. With 1. 25mm jst plug, perfect for Inductrix FC. Insane for blade inductrix, Tiny Whoop, Nano QX etc. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug.

An omnidirectional high sensitivity antenna built-in the transmitter gain antenna. Frequency: 4900-5900mhzv. Work for blade inductrix, Tiny Whoop, Nano QX etc. 5. 8g fpv dipole whip antenna is designed for fx798t aio camera, Eachine EF-01 FPV Micro AIO Camera, Crazepomy 25mW tiny whoop camera. Rakon. This is camera works on a 2.

Blade Inductrix/FPV - Rakonheli CNC 3K Pure Carbon Fiber Stiffener 6mm Motor #ad - 5v - 5v range which means it can run off the Inductrix's 3. 7v single cell battery. Impedance :50 Ohm. Little modification, more applications for Blade Inductrix. Motor diameter: 6mm, motor Length: 15mm, Cable Length: 56mm. Special sauce edition 17500kv @3.

More information about Rakon #ad


Similar products



Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

#ad
Crazepony #ad - Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW. Swr:≤2. 0 Board size: 62. 5x32x5mm, weight: 17g06ounces. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Featuring all 40 channels with Raceband that can be selected via the built-in push button. Little modification, more applications for Blade Inductrix. Micro size:17 * 17. 5 * 12. 5mm, light weight:4.

Crazepony 1S Lipo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX #ad - 5g. Special sauce edition 17500kv @3. 7v / 65, 000 rpm.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

#ad
Crazepony #ad - This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny WhoopPackage Including4 * 230mAh HV 1S Lipo Battery 30C 3. 8v jst-ph 2. 0 connector1 * JST-PH 2. 0 connector cable suitable for eachine e010 JJRC H36 or Tiny Whoop. This is camera works on a 2.

5v - 5v range which means it can run off the Inductrix's 3. 7v single cell battery. Input charge connector: Male 4mm Banana Plug. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Polarization : Linear. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Featuring all 40 channels with Raceband that can be selected via the built-in push button.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector #ad - Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Work for blade inductrix, Tiny Whoop, Nano QX etc.

More information about Crazepony #ad


Similar products



Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop

#ad
Crazepony #ad - Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Frame wheelbase: 67mm, Frame weight: 5g. Weight: 1. 8g each, quantity: 4 pcs 2 CW and 2 CCW. Bonus rubber rings. Dimension: 57mm * 12. 5mm * 6. 2mm, weight: 6. 7g/per unit. Idtx483-cf. Including 1pc quadcopter frame and 4pcs 4-leaf propellers. Input charge connector: Male 4mm Banana Plug.

Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

Crazepony 6pcs Foam Battery Compartment Adaptors for Eachine E010 Frame Tiny Whoop #ad - 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Capacity: standard voltage 4.

More information about Crazepony #ad


Similar products